Cara Membuat Persegi Bolong Di Python

Di artikel saya yang sebelum nya yang berjudul Cara Membuat Persegi di python saya akan mengubah sedikit hingga persegi yang sebelumnya menjadi bolong.nah sekarang saya akan mengubahnya menjadi seperti

x = input("Masukan : ") 
y = x - 2  
j = 0 
#baris pertama 
print ("*" * y + "*" + 2 * j * " " + "*") 
    for i in range(x,2,-1): 
        #hanya di ganti yang berwarna biru
print ("*" + " "* y + "*")
#baris terakhir
print ("*" * y + "*" + 2 * j * " " + "*")  

dan akan menghasilkan seperti


Semoga bermanfaat. . . 
Salam ICAR. . . 
Share:

Cara Membuat Persegi Di Python

Selain membuat segitiga dan segitiga bolong kita juga bisa membuat persegi di python dengan script seperti di bawah ini

x = input("Masukan : ")
for i in range (x):
  print x * "*"

jika tidak mengunakan bintang puncak dan dasar ganti angka 2 menjadi 0
dan  script di atas akan menghasilkan persegi seperti 


Semoga Bermanfaat. . . 
Salam ICAR . . .

Share:

Cara Membuat Segitiga Bolong Di Python

Nah sebelum nya agan udah bisa kan membuat segitiga di python,kalo udah bisa kita tinggal mengedit sedikit script nya hingga seperti 
 

ini script gambar di atas tinggal agan copas dan agan pahami sendiri, bintang puncak dan bintang paling bawah di print terpisah

n = input('masukan sebuah bilangan : ')
#bintang puncak 
print (n) * ' ' + '*'
j = 0
for i in range(n-1,1,-1):
j += 1
        #bintang selain puncak dan paling bawah
print (i *' ' )+ '*' + (2 * j - 1) * ' ' +'*'
#bintang paling bawah
print ' ' + '* ' * n

jika ada pertanyaan dan ada yang kurang mohon kritikannya,karena saya juga masih tahap belajar
Semoga Bermanfaat . . .
Salam ICAR . . .
Share:

Cara Konfigurasi PHP Di Linux Slackware 14.1

Jika agan ingin mengkonfigurasi PHP di Linux "Slackware" Khususnya,agan harus merubah httpd.conf yang berada di /etc/httpd menjadi seperti di bawah ini,cara membukanya nano /etc/httpd/httpd.conf,jika tidak mw membenahinya Copas aja dan jika tidak mw Copas download aja script ini disini

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See for detailed information.
# In particular, see 
#
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/var/run

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module lib/httpd/modules/mod_authn_file.so
#LoadModule authn_dbm_module lib/httpd/modules/mod_authn_dbm.so
#LoadModule authn_anon_module lib/httpd/modules/mod_authn_anon.so
#LoadModule authn_dbd_module lib/httpd/modules/mod_authn_dbd.so
#LoadModule authn_socache_module lib/httpd/modules/mod_authn_socache.so
LoadModule authn_core_module lib/httpd/modules/mod_authn_core.so
LoadModule authz_host_module lib/httpd/modules/mod_authz_host.so
LoadModule authz_groupfile_module lib/httpd/modules/mod_authz_groupfile.so
LoadModule authz_user_module lib/httpd/modules/mod_authz_user.so
#LoadModule authz_dbm_module lib/httpd/modules/mod_authz_dbm.so
#LoadModule authz_owner_module lib/httpd/modules/mod_authz_owner.so
#LoadModule authz_dbd_module lib/httpd/modules/mod_authz_dbd.so
LoadModule authz_core_module lib/httpd/modules/mod_authz_core.so
#LoadModule authnz_ldap_module lib/httpd/modules/mod_authnz_ldap.so
LoadModule access_compat_module lib/httpd/modules/mod_access_compat.so
LoadModule auth_basic_module lib/httpd/modules/mod_auth_basic.so
#LoadModule auth_form_module lib/httpd/modules/mod_auth_form.so
#LoadModule auth_digest_module lib/httpd/modules/mod_auth_digest.so
#LoadModule allowmethods_module lib/httpd/modules/mod_allowmethods.so
#LoadModule file_cache_module lib/httpd/modules/mod_file_cache.so
#LoadModule cache_module lib/httpd/modules/mod_cache.so
#LoadModule cache_disk_module lib/httpd/modules/mod_cache_disk.so
#LoadModule cache_socache_module lib/httpd/modules/mod_cache_socache.so
#LoadModule socache_shmcb_module lib/httpd/modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module lib/httpd/modules/mod_socache_dbm.so
#LoadModule socache_memcache_module lib/httpd/modules/mod_socache_memcache.so
#LoadModule watchdog_module lib/httpd/modules/mod_watchdog.so
#LoadModule macro_module lib/httpd/modules/mod_macro.so
#LoadModule dbd_module lib/httpd/modules/mod_dbd.so
#LoadModule dumpio_module lib/httpd/modules/mod_dumpio.so
#LoadModule echo_module lib/httpd/modules/mod_echo.so
#LoadModule buffer_module lib/httpd/modules/mod_buffer.so
#LoadModule data_module lib/httpd/modules/mod_data.so
#LoadModule ratelimit_module lib/httpd/modules/mod_ratelimit.so
LoadModule reqtimeout_module lib/httpd/modules/mod_reqtimeout.so
#LoadModule ext_filter_module lib/httpd/modules/mod_ext_filter.so
#LoadModule request_module lib/httpd/modules/mod_request.so
#LoadModule include_module lib/httpd/modules/mod_include.so
LoadModule filter_module lib/httpd/modules/mod_filter.so
#LoadModule reflector_module lib/httpd/modules/mod_reflector.so
#LoadModule substitute_module lib/httpd/modules/mod_substitute.so
#LoadModule sed_module lib/httpd/modules/mod_sed.so
#LoadModule charset_lite_module lib/httpd/modules/mod_charset_lite.so
#LoadModule deflate_module lib/httpd/modules/mod_deflate.so
#LoadModule xml2enc_module lib/httpd/modules/mod_xml2enc.so
#LoadModule proxy_html_module lib/httpd/modules/mod_proxy_html.so
LoadModule mime_module lib/httpd/modules/mod_mime.so
#LoadModule ldap_module lib/httpd/modules/mod_ldap.so
LoadModule log_config_module lib/httpd/modules/mod_log_config.so
#LoadModule log_debug_module lib/httpd/modules/mod_log_debug.so
#LoadModule log_forensic_module lib/httpd/modules/mod_log_forensic.so
#LoadModule logio_module lib/httpd/modules/mod_logio.so
LoadModule env_module lib/httpd/modules/mod_env.so
#LoadModule mime_magic_module lib/httpd/modules/mod_mime_magic.so
#LoadModule expires_module lib/httpd/modules/mod_expires.so
LoadModule headers_module lib/httpd/modules/mod_headers.so
#LoadModule usertrack_module lib/httpd/modules/mod_usertrack.so
#LoadModule unique_id_module lib/httpd/modules/mod_unique_id.so
LoadModule setenvif_module lib/httpd/modules/mod_setenvif.so
LoadModule version_module lib/httpd/modules/mod_version.so
#LoadModule remoteip_module lib/httpd/modules/mod_remoteip.so
LoadModule proxy_module lib/httpd/modules/mod_proxy.so
LoadModule proxy_connect_module lib/httpd/modules/mod_proxy_connect.so
LoadModule proxy_ftp_module lib/httpd/modules/mod_proxy_ftp.so
LoadModule proxy_http_module lib/httpd/modules/mod_proxy_http.so
LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module lib/httpd/modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module lib/httpd/modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module lib/httpd/modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module lib/httpd/modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module lib/httpd/modules/mod_proxy_balancer.so
LoadModule proxy_express_module lib/httpd/modules/mod_proxy_express.so
#LoadModule session_module lib/httpd/modules/mod_session.so
#LoadModule session_cookie_module lib/httpd/modules/mod_session_cookie.so
#LoadModule session_dbd_module lib/httpd/modules/mod_session_dbd.so
#LoadModule slotmem_shm_module lib/httpd/modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module lib/httpd/modules/mod_slotmem_plain.so
#LoadModule ssl_module lib/httpd/modules/mod_ssl.so
#LoadModule dialup_module lib/httpd/modules/mod_dialup.so
LoadModule lbmethod_byrequests_module lib/httpd/modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module lib/httpd/modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module lib/httpd/modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module lib/httpd/modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module lib/httpd/modules/mod_mpm_event.so
LoadModule unixd_module lib/httpd/modules/mod_unixd.so
#LoadModule heartbeat_module lib/httpd/modules/mod_heartbeat.so
#LoadModule heartmonitor_module lib/httpd/modules/mod_heartmonitor.so
#LoadModule dav_module lib/httpd/modules/mod_dav.so
LoadModule status_module lib/httpd/modules/mod_status.so
LoadModule autoindex_module lib/httpd/modules/mod_autoindex.so
#LoadModule asis_module lib/httpd/modules/mod_asis.so
#LoadModule info_module lib/httpd/modules/mod_info.so
#LoadModule cgid_module lib/httpd/modules/mod_cgid.so
#LoadModule cgi_module lib/httpd/modules/mod_cgi.so
#LoadModule dav_fs_module lib/httpd/modules/mod_dav_fs.so
#LoadModule dav_lock_module lib/httpd/modules/mod_dav_lock.so
#LoadModule vhost_alias_module lib/httpd/modules/mod_vhost_alias.so
#LoadModule negotiation_module lib/httpd/modules/mod_negotiation.so
LoadModule dir_module lib/httpd/modules/mod_dir.so
#LoadModule actions_module lib/httpd/modules/mod_actions.so
#LoadModule speling_module lib/httpd/modules/mod_speling.so
LoadModule userdir_module lib/httpd/modules/mod_userdir.so
LoadModule alias_module lib/httpd/modules/mod_alias.so
#LoadModule rewrite_module lib/httpd/modules/mod_rewrite.so

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache
Group apache


# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition.  These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# blocks below.
#
    AllowOverride none
    Require all denied

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/srv/httpd/htdocs"
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
    DirectoryIndex index.html index.php index.htm

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
    Require all denied

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

   
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
   

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per- access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "/var/log/httpd/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/var/log/httpd/access_log" combined

    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/srv/httpd/cgi-bin/"


    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock

#
# "/srv/httpd/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
    AllowOverride None
    Options None
    Require all granted

    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/httpd/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /etc/httpd/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

# Supplemental configuration
#
# The configuration files in the /etc/httpd/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include /etc/httpd/extra/httpd-mpm.conf

# Multi-language error messages
#Include /etc/httpd/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /etc/httpd/extra/httpd-autoindex.conf

# Language settings
#Include /etc/httpd/extra/httpd-languages.conf

# User home directories
Include /etc/httpd/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /etc/httpd/extra/httpd-info.conf

# Virtual hosts
#Include /etc/httpd/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /etc/httpd/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /etc/httpd/extra/httpd-dav.conf

# Various default settings
#Include /etc/httpd/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
Include /etc/httpd/extra/proxy-html.conf

# Secure (SSL/TLS) connections
#Include /etc/httpd/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#
#BrowserMatch "MSIE 10.0;" bad_DNT
#
#
#RequestHeader unset DNT env=bad_DNT
#


# Uncomment the following line to enable PHP:
#
AddType application/x-httpd-php .php
Include /etc/httpd/mod_php.conf
# Uncomment the following lines (and mod_dav above) to enable svn support:
#
#LoadModule dav_svn_module lib/httpd/modules/mod_dav_svn.so
#LoadModule authz_svn_module lib/httpd/modules/mod_authz_svn.so

  1. Jika sudah di Copas reboot PC/Laptop agan.
  2. Jika agan download agan pindahkan httpd.conf ke dalam folder /etc/httpd dengan cara
mv root/Download/httpd.conf /etc/httpd
jika sudah Reboot PC/Laptop agan
 
cara mengetahui PHP nya sudah sukses atau belum dengan cara
  • #touch /var/www/htdocs/info.php
  • #nano /var/www/htdocs/info.php
  • setelah terbuka layar blank agan isikan
phpinfo();
?>
 lalu save dengan menekan CTRL+X
  • sekarang buka Web Browser (google chrome,Firefox,dll)
  • coba ketikan localhost/info.php
  • jika sudah terbuka seperti ini itu berarti Configurasi PHP anda Sukses
 

Semoga Bermanfaat. . . 
Salam ICAR. . .
Share:

Cara Mengatasi ERROR --user-data-dir Pada Google Chrome Di Linux


Karena sering kali saya lupa setelah menginstall google chrome di linux maka dari itu ane taro sini dan mungkin agan ada masalah juga seperti ane setelah menginstall google chrome di linux,biasanya Google Chrome ERROR --user-data-dir Ketika akan menjalankan google chrome setelah menginstalnya di linux seperti


nah sekarang ane akan mengatasinya agar google chrome agan bisa berjalan dengan baik. ikuti caranya

  • Buka Konsole/Terminal di linux agan
  • ketikan perintah #nano /opt/google/chrome/google-chrome 
  • setelah tampil seperti



  • Copas --user-data-dir dan letakan di paling bawah,sebelah
# Note: exec -a below is a bashism.
exec -a "$0" "$HERE/chrome"  "$PROFILE_DIRECTORY_FLAG" \
  "$@"

  • hingga menjadi 
# Note: exec -a below is a bashism.
exec -a "$0" "$HERE/chrome"  "$PROFILE_DIRECTORY_FLAG" \
  "$@"
--user-data-dir
  •  setelah di Copas tinggal di save dengan menekan CTRL+X
  • dan coba jalankan Google Chrome nya Lagi,apakah sudah jalan seperti
 

Jika sudah itu bertanda kesuksesan

NP : Cara ini Hanya Berlaku Di Root,karena kalau mengunakan User setelah install langsung bisa di buka

Semoga Bermanfaat . . .
Salam ICAR ...
Share: